Square Rotary Broaches (8mm Shank Diameter)
Polygon Solutions’ 8mm shank square rotary broaches are precision ground with a tolerance of +0/-.0005. Each nominal size conforms to the industry standard – ANSI B18.3 2003. All 8mm shank square rotary broach tools include a pressure relief vent hole that allows air and fluid to freely escape during the rotary broaching process to reduce wear on your machine and extend rotary broach tool life.
8mm Shank Diameter x 1-1/4″ Overall Length
All Broaches Larger than 5/64″ Include Pressure Relief Vent Hole
Square Rotary Broach Custom Options
Our Square Rotary Broaches can be ordered in custom dimensions. Can’t find the size you’re looking for? Polygon Solutions provides fast delivery on custom ½” or 8mm shank square rotary broaches. Simply specify the desired across flat dimension when ordering. Polygon’s manufacturing tolerance is +0/-.0005”. For example, a custom square broach with 0.1234” across flat dimension is part number S01234B.
If you need a square rotary broach to cut deeper than our standard dimensions, perhaps to clear a counter-bore, you can request a custom cut length. Custom cut lengths may be limited by the back-taper on the side of the square broach, or manufacturing limitations. Please call (239) 628-4800 for more information. Rotary broaching more than 1-2x the across flat dimension may not be successful. Broaches may also be weakened because of a deeper cut length.
The standard rake angle (also called the dish angle) is critical to help the chip curl while rotary broaching. However, the rake angle can be modified to suit specific materials. For example, some softer materials may require a steeper angle. Broaching tougher materials may be improved with less, or no rake angle. Please call (239) 628-4800 for more information.
Single vent holes are standard with square rotary broach forms larger than .079″ and allow air and/or fluid to pass though the hex broach and reduce any hydraulic pressure that may occur when broaching a blind hole. Polygon’s rotary broach tool holder is also designed with this feature. However, an additional cross vent hole can be added for holders without the pressure relief system.
All of Polygon Solution’s square rotary broaches are manufactured with a +0/-.0005” tolerance. However, square broaches can be manufactured to a tighter +0/-.0004” tolerance. If you want to use the broach as a gauge, the square broach can also be manufactured without a back-taper. For more information, see Rotary Broach Gauges.